Get To Know
Marble Mirror Finish
- Extravagant decorative effect
- Great design variety
- Excellent drying capacity
- Highly permeable to water vapor
- Excellent coating capacity
- Outstanding workability
DIRECTION FOR APPLICATION: The substrate must be perfectly dry, dust-free, with no humidity and salt stains. Resurface or consolidate the surface with specific products if necessary. In case of mould, treat the surface with suitable specific products. Brush or remove any exterior and old peeling paint. Higher layers of old lime-based paint must be removed. Brush out dust, smother or other deposits before the application. In case of non-homogeneous or chalky surfaces, apply one layer of Papillon Paints Ultra Shield Surface Stabilizer Illusion Sealer and allow to dry. On dry and compact substrates, apply one coat of Papillon Marble Mirror Finish with a stainless steel trowel smoothing the whole surface before it dries out completely. Work only on small areas to avoid any imperfections and/or any exceeding amount of product and allow to dry. Apply a second layer of Papillon Marble Mirror Finish with a stainless steel trowel. Additional coats are required depending on the recommended use of multi-color patterns. After Drying and with 600 no paper and sand with 1500no paper (Dry sanding) until to get a smooth marble mirror finish.